K- series thermostat housing

JMD $9,000.00

Thermostat swivel housing

  Ask a Question
Store
0 out of 5
Category:

Description

The housing swivels, allowing you to position the water outlet angle before it is tightened down.
The provided custom made fitting is the same size as the oem rad hose on one end, and is threaded for an AN fitting on the other end.
This allows you to use whatever size fitting you need for custom installations.
If you want to use braided hose with AN fittings, this housing will bolt on easily and with the right adapter threaded in, you’ll be all set.
The swivel neck comes pre-assembled with a quality Stant thermostat (180 deg °F) which is held in place with a ‘C’ clip.
Adjustable, set the rad hose at any angle.
Fan switch port for engine swaps.
Easily deletes heater core hoses on race cars.
Threaded water outlet for custom setups.
The kit uses a standard size thermostat that you can easily replace with anything in the (160-195 °F) degree range.

Reviews

There are no reviews yet.

Be the first to review “K- series thermostat housing”

Your email address will not be published. Required fields are marked *

5 × two =

No more offers for this product!

General Inquiries

There are no inquiries yet.